MARINE PLYWOOD
This production represents one of the field in which the company has built up a wide experience and it can be able to guarantee reliable supply.

"Marine" plywood is a veneered panel of outstanding durability with respect to fungal decay and bonding quality, making it suitable for the manufacturing and interior fittings of marine craft and several applications in building construction. Its durability derives from the resistance to biodegradation of the wood species used combined with the good weathering performance of the bonding quality and the high number of layers.
Wood species and composition
The timbers most frequently used by Compensati TORO to produce marine plywood are Okoume', Khaya and Sapelli. Okoume' (Aucumea klaineana) is a wood species with a resistance to biodeterioration suitable for the service and hazard classes in which marine plywood is normally employed. Khaya (Khaya sp.) and Sapelli (Entandrophragma cylindricum) are two African woods belonging to the mahogany group that have a nice decorative aspect and are characterized by durability class 3 of EN 350-2. Panels made with the faces in mahogany veneers and inner plies of Okoume' are also available. Moreover, when weight is a factor of critical importance, the above panels can be realized in a mixed composition (combi) with okoume' faces and core veneers on lighter density wood species, which have a durability against fungal attack rating at least of class 4 (EN 350-2).

This type of plywood is made with selected veneers of adequate quality and lay-up. If not otherwise requested, face veneers are of surface appearance class II/III (complying with EN 635) while core veneers have glued edge joints. On request, panels can be overlaid with decorative sliced veneers (for instance Teak, also in thicknesses up to 25/10 mm) or can be made with holly inlay (in white painted wood or black rubber stripes). A more economic version produced in the factory is made overlaying a basic marine plywood with a plastic laminated sheet which reproduces the surface appearance of Teak or Sapeli (generally with parallel white stripes); in this case the reverse side is balanced with a laminated sheet of light colour.

The adhesive used for bonding marine plywood is a modified MUF system that satisfies the requirements for marine applications, while the bonding quality is checked according to EN 314 after a pre-treatment that simulates a long time exposure to weathering agents that the plywood must withstand in service. The best behaviour of the panels is reached when their edges are adequately protected during use.

The marine plywood produced by Compensati TORO is conforming to the standard BS 1088-1:2003 and is also in line with the requirements of EN 13986.
Dimensions
The standard dimensions most commonly produced are:
250/310 x 122/153/183 cm while thickness ranges from 4 to 50 mm for marine plywood made of Okoume' and from 4 to 30 mm for panels made of African mahoganies.
Use
Marine plywood is one of the veneered-based products with the greatest value, nicest appearance and highest durability. Its performance makes this plywood particularly adequate for applications where both its decorative function and mechanical properties are priorities, especially in the naval sector.

Okoume'

Khaya

Sapeli

Teak

Teak with inlay
TECHNICAL DATA SHEET
TECHNICAL DATA SHEET
Okoume' marine plywood
Mahogany marine plywood
More about marine plywood

BROWSE OUR BROCHURE

SELLING CONDITIONS
2009 powered by algatraz algatraz